AdhesivesSealantsCoatings

Industrial adhesives, sealants and coatings for parts that can't fail. Pick your materials and see what holds them.

Pick your materials
+
Find a product for your application Ask a technical specialist
02

Will it survive your conditions?

Set the heat, the chemicals and the load. The bench runs it live and swaps the product if ours won't last.

Bonding Aluminum to Carbon fiber Change
Temperature range
−20 °Cto60 °C
What touches it
How hard does it need to hold?
Still holds with
MX-330
    03

    How is it applied?

    Slow cure holding up your line? Tell us how fast parts need to move. These are the routes that fit.

    Parts need to move on in
    Your line

    Handling strength Full cure

    How it goes on

    • SyringeDots and fine beads on small parts
    • Dual cartridgeTwo-part, mixed in the nozzle
    • Meter-mixPumped from pails and drums
    • Robot beadSame bead, every part, every shift
    • SprayCoatings over big or complex areas
    • Dip or brushSmall batches and touch-ups
    1. 1CleanWipe off oil and dust with solvent
    2. 2Rough up or primeAbrade metal, prime hard plastics
    3. 3Apply and holdClamp until handling strength
    04

    Can we test it first?

    Yes. Every job starts with a free sample

    1. 1SampleIn your hands in 2 days
    2. 2Lab testWe test it on your parts. Report in 10 days
    3. 3Line trialOur engineer on your line
    4. 4ProductionThe same recipe in every batch

    Switching without the risk

    Changing a qualified material is scary. Here's how we make it boring.

    Request a sample
    Every batch, the same Viscosity of the last 24 batches of MX-310, all inside a ±5% band
    • A test plan written with youWe agree what to test and what counts as a pass before anything ships.
    • Qualification paperworkTest reports, first-article data and PPAP support for your approvals.
    • Six months' noticeNo change to a recipe, raw material or plant without telling you in writing first.
    What we do

    From the first question to the thousandth drum

    A

    Choose

    Product selectionWe match a product to your parts, heat and chemicals.
    Application supportWe help set up dispensing, curing and checks on your line.
    B

    Develop

    Custom formulationNothing fits? We make something that does.
    Lab evaluationHeat, chemicals, peel and pull, tested on your real parts.
    C

    Prove

    Sample supplyFree samples, shipped in two days.
    Production trialsWe run it on your line with your team.
    D

    Supply

    Bulk manufacturingBatch-made and certified, from 1 L to full truckloads.
    Packaging optionsSyringes to 1,000 L totes. Your label or ours.

    10 mL to 1,000 L

    Same product at every size. Start small, then scale without requalifying.

    You use about
    Technical data

    Every number, before you buy

    Data sheets, safety sheets, prep, cure schedules, storage and test results. No sign-up.

    Fix a problem

    Tell us about the job

    A chemist reads every request and answers within one working day. We filled in what you picked above.

    Answered within one working day
    Concept site by Figured Media. Not a real business.