Drover 1-800-555-0137 Send us your layout

Keep it moving. Conveyor systems built around your product and your floor.

Belt, roller and pallet conveyors that fit your floor, carry your product safely and plug into what you already run.

Plan your conveyor system Send us your layout

Every extra step costs you.

Most floors lose hours to walking, waiting and lifting. We map where product stalls, then give it one clear path.

Walking per shift
6.2 mi0.4 mi
Hands on each order
9 touches3 touches
Orders out per hour
210290

Sample results from a parcel hub we re-planned in 2025.

Walking routes Conveyor path

What we build

Six product families. Each one built to order in our own shop, and each one comes with drawings and 3D files.

Load
Setting

See it running

Real lines, real product. Hover a clip to watch it.

Four questions we hear every week

Straight answers, before you pick up the phone.

01

Can it carry our product safely?

Type in your product. The conveyor rebuilds under it and tells you what it needs.

Your product inches · pounds
Where it runs
Try
Carries safely

24 V roller conveyor

Roller centers
3 in
Between frames
15 in
Speed you need
33 ft/min
    Send this to an engineer
    02

    Will it fit our layout?

    Probably, in less floor than you think. Lines can turn, loop back, merge or go up and over.

    Floor space
    60 × 4 ft
    Height
    Floor level
    Good for
    Receiving to packing
    Layout drawing (DWG, PDF)
    03

    Can it connect to our equipment?

    Yes. We match your heights, speeds and signals, so product hands off without a bump.

    • Same heightInfeed and outfeed matched to within 1/8 in.
    • Same speedWe read your machine's rate and match it.
    • Same signalsReady, send and received, wired or over the network.

    EtherNet/IP · PROFINET · Modbus TCP · EtherCAT · Hardwired I/O

    04

    How easy is it to clean?

    Open it up in minutes, without tools. Belts lift, guards swing and rollers pop out by hand.

    1. StopLock out at the panel
    2. LiftBelt rises on lifters
    3. RinseOpen frame, nowhere to hide
    4. RunBack in production

    0:00 Typical clean, sanitary belt line

    Maintenance guides (PDF)

    One team, sketch to running line

    We plan it, build it, wire it, install it and keep it running. You deal with one company the whole way.

    1. 01

      Custom layouts

      Send a sketch or a CAD file. We draw the line and send a 3D model before anything is built.

      1–2 weeks
    2. Control panel with a green run button and a red emergency stop beside a conveyor
      02

      Controls integration

      Panels, sensors and PLC code, tied into the machines and software you already use.

      Built with the line
    3. Two technicians leveling and bolting a roller conveyor section
      03

      Installation

      Our own crews install, test and train your team. Weekend and night shifts to keep you running.

      2–5 days on site
    4. Shelves of spare rollers, belts and green drive motors
      04

      Replacement parts

      Rollers, belts, motors and sensors on the shelf, for our lines and most other brands.

      Ships in 24 hours

    Need a part?

    Search by part number, serial or name. In stock parts ship the same day.

      Files and guides

      Configuration drawingsPDF and DWG for every standard module218 files 3D filesSTEP and native CAD, drop straight into your layoutSTEP Maintenance guidesStep-by-step, with the parts list for each jobPDF

      Line down? Call the 24/7 service line: 1-800-555-0199

      Send us your layout

      A sketch on a napkin is fine. An engineer reads it and calls you within one business day.

      • Your product size and weight
      • How many per minute or hour
      • Where it runs (dry, washdown, freezer)
      • The space you have, floor and ceiling
      • Where product turns, merges or connects
      DROVER Layout request

      From

      Contents

      Handling

      Concept site by Figured Media. Not a real business.